dmesg - First run under KLinux

Return To First run under KLinux System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.0.3 (root@UcLinuxPC) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP Thu May 14 17:13:39 UTC 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x00000000ad583fff] usable
BIOS-e820: [mem 0x00000000ad584000-0x00000000ad5b3fff] reserved
BIOS-e820: [mem 0x00000000ad5b4000-0x00000000ad607fff] usable
BIOS-e820: [mem 0x00000000ad608000-0x00000000ad718fff] ACPI NVS
BIOS-e820: [mem 0x00000000ad719000-0x00000000ada7afff] reserved
BIOS-e820: [mem 0x00000000ada7b000-0x00000000ada7bfff] usable
BIOS-e820: [mem 0x00000000ada7c000-0x00000000adabdfff] reserved
BIOS-e820: [mem 0x00000000adabe000-0x00000000adc2bfff] usable
BIOS-e820: [mem 0x00000000adc2c000-0x00000000adff9fff] reserved
BIOS-e820: [mem 0x00000000adffa000-0x00000000adffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900-ITX, BIOS P1.40 10/31/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xae000 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FE0000000 write-back
  2 base 0A0000000 mask FF0000000 write-back
  3 base 0AE800000 mask FFF800000 uncachable
  4 base 0AF000000 mask FFF000000 uncachable
  5 base 100000000 mask F00000000 write-back
  6 base 200000000 mask FC0000000 write-back
  7 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
e820: update [mem 0xae800000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fd6d0-0x000fd6df] mapped at [c00fd6d0]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0098000] 98000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37000000-0x373fffff]
 [mem 0x37000000-0x373fffff] page 4M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
 [mem 0x00100000-0x003fffff] page 4k
 [mem 0x00400000-0x1fffffff] page 4M
init_memory_mapping: [mem 0x20100000-0x36ffffff]
 [mem 0x20100000-0x203fffff] page 4k
 [mem 0x20400000-0x36ffffff] page 4M
BRK [0x01c11000, 0x01c11fff] PGTABLE
init_memory_mapping: [mem 0x37400000-0x377fdfff]
 [mem 0x37400000-0x377fdfff] page 4k
BRK [0x01c12000, 0x01c12fff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0xAD68E080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0xAD6992E0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150204/tbfadt-618)
ACPI: DSDT 0xAD68E190 00B150 (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0xAD718F80 000040
ACPI: APIC 0xAD6993F0 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0xAD699478 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: AAFT 0xAD6994C0 0000FF (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: MCFG 0xAD6995C0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: LPIT 0xAD699600 000104 (v01 ALASKA A M I    00000003 VLV2 0100000D)
ACPI: HPET 0xAD699708 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0xAD699740 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
ACPI: SSDT 0xAD699EA8 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
ACPI: SSDT 0xAD69A138 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
ACPI: UEFI 0xAD69A2B8 000042 (v01 ALASKA A M I    00000000      00000000)
ACPI: Local APIC address 0xfee00000
1896MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
BRK [0x01c13000, 0x01c13fff] PGTABLE
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  Normal   [mem 0x0000000001000000-0x00000000377fdfff]
  HighMem  [mem 0x00000000377fe000-0x00000000adffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009bfff]
  node   0: [mem 0x0000000000100000-0x000000001fffffff]
  node   0: [mem 0x0000000020100000-0x00000000ad583fff]
  node   0: [mem 0x00000000ad5b4000-0x00000000ad607fff]
  node   0: [mem 0x00000000ada7b000-0x00000000ada7bfff]
  node   0: [mem 0x00000000adabe000-0x00000000adc2bfff]
  node   0: [mem 0x00000000adffa000-0x00000000adffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000000adffffff]
On node 0 totalpages: 710120
free_area_init_node: node 0, pgdat c1aaedc0, node_mem_map f5cce028
  DMA zone: 40 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3995 pages, LIFO batch:0
  Normal zone: 2180 pages used for memmap
  Normal zone: 222974 pages, LIFO batch:31
  HighMem zone: 483151 pages, LIFO batch:31
Using APIC driver default
x86/hpet: Will disable the HPET for this platform because it's not reliable
Reserving Intel graphics stolen memory at 0xaf000000-0xbeffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0x6c])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x9a])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] high dfl lint[0x5e])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] res res lint[0x80])
ACPI: NMI not connected to LINT 1!
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 16 pages/cpu @f5c82000 s36556 r0 d28980 u65536
pcpu-alloc: s36556 r0 d28980 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 707900
Kernel command line: root=/dev/sda1 init=/bin/systemd
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:000ae000)
Initializing Movable for node 0 (00000000:00000000)
Memory: 2799100K/2840480K available (7807K kernel code, 498K rwdata, 2684K rodata, 664K init, 616K bss, 41380K reserved, 0K cma-reserved, 1932604K highmem)
virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                     .init : 0xc1abf000 - 0xc1b65000   ( 664 kB)
                     .data : 0xc17a033b - 0xc1abd940   (3189 kB)
                     .text : 0xc1000000 - 0xc17a033b   (7808 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:2304 nr_irqs:1024 16
CPU 0 irqstacks, hard=f540a000 soft=f5410000
Console: colour VGA+ 80x25
console [tty0] enabled
Maximum core-clock to bus-clock ratio: 0x18
Resolved frequency ID: 0, frequency: 83200 KHz
TSC runs at 1996800 KHz
lapic_timer_frequency = 277333
tsc: Detected 1996.800 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3995.00 BogoMIPS (lpj=6656000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150204
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
AppArmor: AppArmor disabled by boot time parameter
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 36K (c1b65000 - c1b6e000)
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (fam: 06, model: 37, stepping: 08)
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000ffffffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f54d0000 soft=f54d2000
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Initializing CPU#1
CPU 2 irqstacks, hard=f54dc000 soft=f54de000
 #2
Initializing CPU#2
CPU 3 irqstacks, hard=f54f0000 soft=f54f2000
 #3
Initializing CPU#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15980.00 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.capability
PM: Registering ACPI NVS region [mem 0xad608000-0xad718fff] (1118208 bytes)
xor: measuring software checksum speed
   pIII_sse  :  6202.800 MB/sec
   prefetch64-sse:  6871.200 MB/sec
xor: using function: prefetch64-sse (6871.200 MB/sec)
pinctrl core: initialized pinctrl subsystem
RTC time:  1:14:15, date: 06/13/15
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
raid6: mmxx1     1361 MB/s
raid6: mmxx2     1841 MB/s
raid6: sse1x1    1498 MB/s
raid6: sse1x2    1530 MB/s
raid6: sse2x1    2966 MB/s
raid6: sse2x2    3038 MB/s
raid6: using algorithm sse2x2 (3038 MB/s)
raid6: using ssse3x1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF55AAC00 0003D7 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF55AB000 0003DE (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF55C7C00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF4CD33C0 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [CLK0] (on)
ACPI: Power Resource [CLK1] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0 
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0816ffe window]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:13.0: reg 0x24: [mem 0xd0816000-0xd08167ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0810000-0xd0813fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd0814000-0xd081401f]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xd0704000-0xd0704fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xd0700000-0xd0703fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io  0xd050-0xd057]
pci 0000:04:00.0: reg 0x14: [io  0xd040-0xd043]
pci 0000:04:00.0: reg 0x18: [io  0xd030-0xd037]
pci 0000:04:00.0: reg 0x1c: [io  0xd020-0xd023]
pci 0000:04:00.0: reg 0x20: [io  0xd000-0xd01f]
pci 0000:04:00.0: reg 0x24: [mem 0xd0600000-0xd06001ff]
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
sta2x11_scr_init
sta2x11_apb_soc_regs_init
sta2x11_sctl_init
sta2x11_apbreg_init
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0xad584000-0xafffffff]
e820: reserve RAM buffer [mem 0xad608000-0xafffffff]
e820: reserve RAM buffer [mem 0xada7c000-0xafffffff]
e820: reserve RAM buffer [mem 0xadc2c000-0xafffffff]
e820: reserve RAM buffer [mem 0xae000000-0xafffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0500-0x05fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 3]
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 PNP0401 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:07: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
PnPBIOS: Disabled by ACPI PNP
Switched to clocksource acpi_pm
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000]
pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000]
pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x006f window]
pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd0816ffe window]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
sta2x11_mfd_init
microcode: CPU0 sig=0x30678, pf=0x4, revision=0x811
microcode: CPU1 sig=0x30678, pf=0x4, revision=0x811
microcode: CPU2 sig=0x30678, pf=0x4, revision=0x811
microcode: CPU3 sig=0x30678, pf=0x4, revision=0x811
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1434158055.813:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM installed
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 [email protected]).
Key type big_key registered
SELinux:  Registering netfilter hooks
async_tx: api initialized (async)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Running resizable hashtable tests...
  Adding 2048 keys
  Traversal complete: counted=2048, nelems=2048, entries=2048
  Table expansion iteration 0...
tsc: Refined TSC clocksource calibration: 2000.000 MHz
  Verifying lookups...
  Table expansion iteration 1...
  Verifying lookups...
  Table expansion iteration 2...
Switched to clocksource tsc
  Verifying lookups...
  Table expansion iteration 3...
  Verifying lookups...
  Table shrinkage iteration 0...
  Verifying lookups...
  Table shrinkage iteration 1...
  Verifying lookups...
  Table shrinkage iteration 2...
  Verifying lookups...
  Table shrinkage iteration 3...
  Verifying lookups...
  Traversal complete: counted=2048, nelems=2048, entries=2048
  Deleting 2048 keys
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4 model 0x37
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
hpet: number irqs doesn't agree with number of timers
Non-volatile memory driver v1.3
loop: module loaded
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: controller can't do DEVSLP, turning off
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part deso 
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xd0816000 port 0xd0816100 irq 87
ata2: DUMMY
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
scsi host2: ahci
scsi host3: ahci
ata3: SATA max UDMA/133 abar m512@0xd0600000 port 0xd0600100 irq 88
ata4: SATA max UDMA/133 abar m512@0xd0600000 port 0xd0600180 irq 88
libphy: Fixed MDIO Bus: probed
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
ACPI Warning: SystemIO range 0x0000f000-0x0000f01f conflicts with OpRegion 0x0000f000-0x0000f00f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
ashmem: initialized
PCCT header not found.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy 
nf_tables_compat: (c) 2012 Pablo Neira Ayuso 
ip_set: protocol 6
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
ip6_gre: GRE over IPv6 tunneling driver
NET: Registered protocol family 17
sctp: Hash tables configured (established 65536 bind 65536)
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
registered taskstats version 1
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 3:247:205
tty ttyt3: hash matches
acpi device:2d: hash matches
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB03, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223Q  SB03 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1118 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 664K (c1abf000 - c1b65000)
random: systemd urandom read with 66 bits of entropy available
systemd[1]: systemd 220 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86.
systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Remote File Systems.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
random: nonblocking pool is initialized
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Mounting Configuration File System...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Starting Paths.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 1715 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Arbitrary Executable File Formats File System.
EXT4-fs (sda1): re-mounted. Opts: (null)
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started First Boot Wizard.
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Rebuild Dynamic Linker Cache.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Starting Local File Systems (Pre).
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Started Commit a transient machine-id on disk.
systemd[1]: Started Rebuild Journal Catalog.
systemd[1]: Started Update is Completed.
systemd[1]: Mounted Virtual Machine and Container Storage.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Kernel Device Manager.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
systemd[1]: Started Journal Service.
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:310: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:313: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:315: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:317: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:319: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:321: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:323: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:325: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:327: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:329: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:331: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:333: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:335: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:337: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:339: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:341: Invalid argument
systemd-journald[1721]: Received request to flush runtime journal from PID 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
mei_txe 0000:00:1a.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.3 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.0.3 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2378: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2380: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2382: Invalid argument
input: PC Speaker as /devices/platform/pcspkr/input/input5
Error: Driver 'pcspkr' is already registered, aborting...
sound hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    dig-out=0x1e/0x0
usb 1-1: new high-speed USB device number 2 using xhci_hcd
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Front Mic=0x19
sound hdaudioC0D0:      Rear Mic=0x18
sound hdaudioC0D0:      Line=0x1a
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=174c, idProduct=3074
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 2-1: Product: ASM107x
usb 2-1: Manufacturer: ASRock
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usb 1-1: New USB device found, idVendor=174c, idProduct=2074
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 1-1: Product: ASM107x
usb 1-1: Manufacturer: ASRock
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usb 1-2: new high-speed USB device number 3 using xhci_hcd
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ppdev: user-space parallel port driver
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:09: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xf88f0000, d0:50:99:59:e0:5a, XID 0c000800 IRQ 93
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:03:00.0 enp3s0: renamed from eth0
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
intel_soc_dts_thermal: request_threaded_irq ret -22
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_soc_dts_thermal: request_threaded_irq ret -22
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:5211: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2694: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:5258: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2741: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2743: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:5350: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2798: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2803: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:4726: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:4728: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:5508: Invalid argument
Adding 4194300k swap on /dev/sda2.  Priority:-1 extents:1 across:4194300k FS
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
cfg80211: Calling CRDA to update world regulatory domain
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:2955: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:20029: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:227290: Invalid argument
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:227292: Invalid argument
audit: type=1701 audit(1434143958.304:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=14484 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=6
audit: type=1701 audit(1434144440.504:3): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=19424 comm="java" exe="/usr/lib/jvm/java-7-openjdk/jre/bin/java" sig=6
audit: type=1701 audit(1434144442.047:4): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=19464 comm="java" exe="/usr/lib/jvm/java-7-openjdk/jre/bin/java" sig=6
audit: type=1701 audit(1434144553.704:5): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=29023 comm="java" exe="/usr/lib/jvm/java-7-openjdk/jre/bin/java" sig=6
audit: type=1701 audit(1434144555.294:6): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=29061 comm="java" exe="/usr/lib/jvm/java-7-openjdk/jre/bin/java" sig=6
audit: type=1701 audit(1434145124.857:7): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=17720 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434145309.217:8): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=17913 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434145329.801:9): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=17935 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434145335.994:10): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=17948 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434145336.094:11): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=17945 comm="strace" exe="/usr/bin/strace" sig=11
audit: type=1701 audit(1434145371.244:12): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=18010 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434145377.504:13): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=18041 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434145383.331:14): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=18054 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434145383.414:15): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=18051 comm="strace" exe="/usr/bin/strace" sig=11
systemd-journald[1721]: Failed to save stream data /run/systemd/journal/streams/8:285347: Invalid argument
audit: type=1701 audit(1434147341.434:16): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=31951 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434147398.681:17): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=32012 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434147413.251:18): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=32035 comm="Xorg" exe="/usr/lib/xorg-server/Xorg" sig=11
audit: type=1701 audit(1434147413.334:19): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=32032 comm="strace" exe="/usr/bin/strace" sig=11

Return To First run under KLinux System Information